FlexNet Manager Knowledge Base

Search our extensive FlexNet Manager knowledge base to get answers to specific questions you have
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Knowledge Base Articles

How to enable Beacon Reverse Proxy Setup

When setting up the Beacon its possible to route it through a reverse proxy, in the image above this is explained, The agents only have network availability to the reverse proxy server (Davecorp) However the agents will instead try and target the b...

1.png 2.png 3.png
dcollins by Flexera Alumni
  • 6271 Views
  • 7 comments
  • 1 kudos

Unable to accept unprocessed purchases

On the Unprocessed Purchases page, if you’re unable to accept a purchase because the button is disabled, this is often due to the purchase not including the maintenance plan. FlexNet Manager Suite does not include maintenance plans in purchases b...

unprocessed.png procurement.png save purchase.png recalculate.png
Graemehin by Level 5 Flexeran
  • 607 Views
  • 0 comments
  • 2 kudos

Manipulating BatchProcess Tasks

  There may be times when you need to kill a long running Batch Processor Task as it may be blocking subsequent tasks. You can do this using the BatchProcessTaskConsole, which can be found on the Batch Processor server in C:\Program Files (x86)\Flex...

Graemehin by Level 5 Flexeran
  • 3879 Views
  • 2 comments
  • 3 kudos

Unable to delete disabled beacon

Description When attempting to delete a beacon in disabled status in the Beacons view, a red bar error occurs.The beacon remains undeleted.   Workaround Change the beacon status before attempting to delete. Or Run the query below on the complian...

Labels