cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
nrousseau1
By Level 10 Champion
Level 10 Champion

This is all about sharing and applying best practices

You may have seen here and there interesting KB articles, using the powerful customizations possibilities of FNMS to provide extensions to the out of the box value for reporting or automations... The issue is that the articles are spread and unless you know what you look for you may miss some interesting information.

The purpose of this post, that will be extended over the time, is to provide you with a "SAM Best Practices Hub", a single pane of glass to understand and use the published solutions and the coming features: SAM Optimization Hub in 2022 Q3, SAM Operations Transparency Hub in Q4 2022, a SAM Data Transparency Hub in 2023... where these best practices will be progressively incorporated.

The solutions are addressing both ends of the "SAM Maslow Pyramid" (from bottom to top) and are anticipating where Flexera goes with SAM:

  • Provide data and KPIs to monitor the health of your SAM Project. The custom reports will gradually be included in the SAM Operations Hub... Released in April 2023
  • Provide transparency on your SAM data (usage, Oracle instances and options details, overview on SAP inventory...). The SAM Publisher Hub is planned for 2023 Q4
  • Provide the high end value that does beyond compliance, with a focus on Optimization. Most of reports have been productized in 2021/2022. The SAM Optimization Hub delivered in December 2022 summarizes and articulate these reports.

ITAMMaslow.png

An "Other Best Practices" section will provide at the end of the article useful pointers to solutions that don't fall under the umbrella of these three "hubs".

The first section of the article gives pointers to the recordings and supporting presentations of all delivered SAM Best Practices Webinars, that are delivered monthly and provide a deep dive on a topic in one hour.

Best practices through the SAM Best practices Monthly Webinars

Every month, one topic is covered in a one hour recorded session. The sessions are announced in the Community Hub you can subscribe to get the notifications. The sessions' recording and PowerPoint and additional documents are shared in the Hub too. Here are the available resources

If you are interested in joining these monthly calls and other Flexera presentations, keep an eye on the Community Hub and register to the events you are interested in. 

You can also vote for the topics that represent most interest for you on your SAM journey to influence the order of presentation in these calls. 

The SAM Operations Hub: transparency and KPIs on operations (Released in 2022 R2.4 - April 2023)

Let's start with the foundation: there are key questions that any SAM Manager must have answers to before even thinking about compliance or optimization... This structure anticipates the SAM Operations Hub that will provide KPIs and answers to these questions. Mockup below, please click on image to zoom.

The SAM Operations Hub provides a single pane of glass to monitoring 13 SAM performance KPIs (snapshot and one year trend), and provides all explanations and underlying reports that explain the details and allow to identify quality issues (gaps, false positives...).

An Enterprise Filter allows to slice the KPIs in the locations, corporate units or cost centers dimensions.

SAM Operations Hub v2.png

     The structure of the Hub will be the following

  • Can I trust my inventory?
    • Are my inventory import system tasks successful?
    • Are my beacons reporting correctly?
    • Is my inventory exhaustive? Does vCenter report VMs that are not inventoried?
    • Do I have aging inventory?
    • Do I have some "merged devices" or "ESX ghosts" issues?
    • Were some inventory sources disabled that will cause false positives?
    • What are the vCenter inventory issues?
    • What is my proportion of non-Cloud Orphan VMs?
    • What are the Oracle Inventory issues?
    • Are some Oracle Enterprise Manager Servers (OEM) reporting false positives on Options or Management packs usage?
    • Can I trust the recognition / usage? Are the important applications not recognized?
  • Are SAM Operations run an efficient way? What are the needed actions?
    • What proportion of commercial applications are monitored by licenses?
    • Are all my purchases processed?
    • Are Licenses correctly created?
    • Are there upcoming contracts renewals?
    • Are there subscriptions purchases needing renewal?

More details and related published solutions

Can I trust my inventory?

Are my inventory import system tasks successful?

This should be the first check of the day. The system tasks  screen (Out of the box) (Only show last run = Yes, Status = failed) will give the right data and the logs.

Are my beacons reporting correctly?

Beacons are key components of the ITAM architecture that transfer all inventory and discovery files run inventory tasks, schedule business imports, upload logs... A beacon could stop reporting due to the Beacon Engine Service being stopped, the upload scheduled task disabled, authentication issues (agents can't connect to the Beacon inventory web service and upload NDI files...).

The Beacons screen (Out of the box) gives the list of beacons with status, pending upload files data. Each beacon detail record gives detailed upload status.

Is my inventory exhaustive? Does vCenter report VMs that are not inventoried?

The VMs Gaps From vCenters report (Released in 2021R1.4) catches the VMs reported by vCenter imports but not inventoried with an agent. This Community solution  allows to create the report on premise.

nrousseau1_1-1650008695746.png

Do I have aging inventory?

The "out of date inventory" screen (Out of the box) adresses the need (out of the box). A pointer to the screen will be in the SAM Operations hub with a KPI (proportion of the full active inventory)

nrousseau1_3-1650008695608.png

Should I create a script that that ignores old active computers and reactivates the recently inventoried but ignored?

The Short Practice Guide on Managing SAM Operations in FNMS / Flexera One ITAM  provides a word document that includes this script p13. Note that a "cleanup" feature has been implemented from 2021R1.4 to delete from Inventory Manager any aging inventory based on a threshold you can define (30, 90 days...)

Do I have some "merged devices" or "ESX ghosts" issues? 

The Merged Computers from Imported Computers report (Released in 2022R2.2) provides the two reports that that allow to understand computers (potentially coming from multiple sources) before they are merged. False positives and sticky applications can be caused by disabled sources (to be deleted absolutely) or duplicates from te same source (deleting computers from InventoryManager may be necessary). On older versions of FNMS (before 2020R1), ESX with the same serial number can alternatively be deleted and cause orphan virtual machines.

nrousseau1_2-1650008695356.png

Were some inventory sources disabled that will cause false positives?

I have seen customers who had 3 times a different connection to the same SCCM database from three beacon. One was active, 2 were disabled but not deleted: imagine the billion of useless files evidences and the "sticky" applications reported by dormant sources. Note that FNMS 2020R2+ versions keep the latest of the merged record's evidence for recognition when they come from the same source. However, 3 SCCM connections are considered as three sources... A pointer to the inventory connections will allow to focus on these possible issues. The Data inputs / Inventory  (Out of the box) screen will show you inventory sources, eventually disabled or that failed for a period... here are the candidates to fix... or delete!

Disabled source.png

 

What are the vCenter inventory issues?

Host to VM link is critical for many server applications licensing (Oracle, Windows & SQL Server, IBM PVU and VPC...). The  vCenter Inventory Troubleshooting report (Released in 2022 R2.3) gives you the list of servers that reported from the vCenter discovery, with the dates (VMWare Inventory, VMWare discovery), the error logs and high level analysis. Community Solution  here.

PreviewvCenter.png

What is my proportion of non-Cloud Orphan VMs?

A VM with no host is the sign either of a vCenter inventory issue (the VM has been instantiated (with an inventory agent) but not yet reported by a vCenter) or an issue in status synchronization (The VM is decommissioned, no longer reported by vCenter (so... unlinked from its last host), but still active and inventoried).

As expensive server licenses require the link between VMs and hosts to compute license consumption, orphan VMs are a serious issue. For instance, on Windows Server, the VMs are unlicensed, which keeps them invisible in the license consumption.

The all Inventory   screen (Out of the Box) filtered on "device type = Virtual Machine", Host is empty and Hosted In = "On premise" will show the issue. More than 10% of Orphan VMs is an issue.

What are the Oracle Inventory issues?

 The Oracle Inventory Troubleshooting report (Released in 2022R2.4catches all issues and shows the last error logs. It prioritizes the issues based on issue type of logs information. This Community Solution provides a custom SQL report if you are on a previous on premise version.

Oracle Inventory Quality Troubleshooting.png

Are some Oracle Enterprise Manager Servers (OEM) reporting false positives on Options or Management packs usage?

A decommissioned instance still configured in an OEM will result into the instance reporting for options / management packs consumption, but not for Oracle Database Enterprise edition. A Possible Options False Positives From OEM  report (Released in 2022 R2.3) catches these cases. 

Can I trust the recognition / usage? Are the important applications not recognized?

The Unrecognized Installer Evidence Analysis  report (Released in 2022 R2.3) analyzes the installer unrecognized evidences (recognition in 90% of times triggered by installer evidences) and finds matching recognized raw evidences. It prioritizes the evidences to manage and suggests evidences (with the right wild cards). Community Solution here.

RecommendedARLExtensions.png

Are SAM Operations run an efficient way? What are the needed actions?

What proportion of commercial applications are monitored by licenses?

The unlicensed Installations screen (Out of the box) gives you a view on installations applications "under the radar". For Applications that have 0 licenses, no license monitors these applications, which opens a liability risk. Then, you could have licenses covering applications, but active devices have installations of these applications that are not "monitored" by licenses, in the case of restricted licenses or Named User licenses. Managed vendors should have no "unlicensed installations".

The License Consumption and unlicensed Product Risks report (Released in 2022R2) mixes License Consumption data with unlicensed products counts to provide a single pain of glass for your compliance and license gaps.

License Compliance And Unlicensed Product Risk.png

 Are all my purchases processed?

There are multiple approaches for managing purchases. You can import purchases and defer publishers that are out of scope (no link will be performed to licenses), or only import purchases for vendors in scope. In any case, your "Unprocessed purchases" screen (Out of the box) should have no record... otherwise, it means some licenses are missing entitlements and are pessimistic on your compliance position... or licenses have not been created, which opens a liability risk.

Are Licenses correctly created?

Having licenses linked to active maintenance purchases not covering all versions of a product may be the sign that upgrade / downgrade right have not been correctly applied. A more complex to identify use case is when a multi product license does not have consistent upgrade and downgrade rights across all products. That's a classical issue that a "Licenses issues analysis" report (Released in 2022 R2.3) addresses.  

Are there upcoming contracts renewals?

The Contract Renewals screen (Out of the box) gives this list. The Contracts with Expiring Terms or Conditions  goes one steps deeps and check across terms and conditions that have their own dates.

Are there subscriptions purchases needing renewal?

A report showing all purchases with an expiry date within 30, 60 or 90 days and their linked licenses would address the visibility and renewal process activity visibility. 

Towards a SAM Publisher Hub (Planned for Q4 2023)

The SAM Publisher Hub (and related screen extensions) aim to provide an application Publisher centric view of your SAM. It will be adapted in the way organizations organize their SAM Practice per Publisher. It will allow also to solve a long lasting challenge that Purchase, Contracts and licenses publishers are not normalized (contrarily to the Application Publisher) and are technically vendors (Microsoft France, Adobe US etc.) that can be created by users or be imported with purchases for instance.

The Vendor screen will be extended

The screen (vendor detail) will include the license and Publisher tabs.

There will be a calculated (application) Publisher (based on historical data (Direct or indirect links between purchases, contracts and licenses)). User will be able to pick up manually a lined Application Publisher that will override the calculated publisher. 

A New Publisher screen will be created  (Released in 2023R1.1)

Application Publishers Screen.png

 The Publisher detail will contain the full picture, with tabs that will allow the processes you can do from the generic screens

  • Installed Applications
  • Licenses
  • Contracts
  • Purchases
  • Spends by contract / quarter
  • Unrecognized evidence
  • Unlicensed installations

The SAM Publisher Hub will provide visualization and trends for the main topics... and a link to the Application Publisher Detail

  • Publisher SAM transparency: a vendor focused (“all vendors” is an option) dashboard of
    Publisher to Vendor normalization
  • Current compliance (and trend)
  • Current commercial deployed applications (and trend). Licensed / unlicensed.
  • Current contracts / coming renewals
  • Current subscriptions / needed renewal
  • Total spend trend by Purchase type, by month

SAM Publisher Hub.png

More transparency to come

  • Application transparency
    • Recognized applications transparency
    • Applications usage details
    • Recognition gap analysis
  • Oracle Transparency
  • License consumption transparency
    • Global consumption and related financial impact
    • Sub Enterprise consumption and financial impact
    • Aggregated view of license / unlicensed products consumption
    • License charge back report
  • SAP data transparency
    • SAP systems Inventory Overview
    • Most Used Roles by License Types
    • Raw engine measurement data
    • Etc.

More details and related published solutions

Bits and bytes that explain the the license liability

Application Transparency

What are the raw signatures that allowed to recognize applications?

The Application transparency report (Released in 2021R1.4) and published the the community as a KB article   provides the full details that links the dots between the raw evidences and the recognized (and eventually licensed) application installation.

Application Transparency.png

 The Raw Evidence on computer custom report published in the community based on a ComputerName|%EvidenceName% will return all installer, file and WMI evidence matching the evidence name input, eventually across all devices (for instance "|visio.exe" ).

Raw evidence on computer.png

Oracle Transparency

Why are some Oracle options reported as used?

The Oracle Feature to Options transparency report  provides the reason why Options have been reported as used, across Oracle instances. It is using the Oracle transparency information that you can find on each instance when clicking on the "Yes" or "No" hyperlink of "used" column of the options tab.

OptionsUsageDetailsReportPreview.png

What are my Oracle instances details?

The Oracle inventory details incl. exact version report provide the Instances details, including the exact version that can be found in the instance attributes.

InstanceDetailsIncludingExactVersionReportPreview.png

What are my user applications usage details?

The "Installed Applications Usage details" report provides user per user, all usage information 

InstalledApplicationsUsageDetails.png

 

What are my licenses restrictions?

this is complex to understand across licenses what licenses are scoped to which entities, with eventual overlaps. The "Flat List Of License Restrictions" report provides this transparency.

SAP Transparency

What are my SAP inventory details?

The Details on SAP systems  (Released in 2022R2.4) Inventory report gives the overview, system per system, of the number of users, engine and transaction data age, number of transaction records etc.  Community Solution here.SAP3.png

The raw engine measurement data report give details on all reported engine measurements.

SAP5.png

 The SAP active users counts over one year report shows the evolution on the number of users, month per month, on each SAP system.

SAP4.png

The Most Used Roles By License Type And System report allows to understand from real role usage per system the mapping between roles and license types.

SAP7.png

What are my Citrix remote access details?

Citrix is  an area where transparency reports are critical, as users, based of access rights to VDIs, have remote access applications created on their computers. The Citrix Virtual Desktops Installer Evidence report for instance gives details on the end computer, user, VDI causing the installer evidence, AD group the user is related to... all the information that allow to link the dots on this tricky remote applications use case. Other reports give Citrix transparency that will be articulated in the SAM Transparency Hub.

What are my license consumptions details, including charge back?

A License Consumption including Charge Back REST API has been Published in 2021R1.4  for Cloud customers only that provides license per license the full details, including the license consumption recharged points and value, computed often at host level (for Windows Server, SQL Server, IBM PVU or VPC licenses, or even Cluster level (Oracle Processor)) and "rolled down" to the installed VMs level by the API. This way, shared resources may "carry" the consumption but installed resources (often owned by the liable entities) are charged for the license usage.

More reports will be included in Flexera One ITAM / in the community supporting this license consumption / charge back transparency.

The SAM Optimization Hub (Delivered with 2022R2)

Once foundations are solid (you can trust your inventory, licenses have been correctly created, the full installed estate is under control) you can start taking full advantage of compliance and compute optimizations: you have reached the top of the Pyramid and can really enjoy the full SAM value delivered by Flexera! Mockup below. Please click on the image to zoom.

SAM Operations Hub.png

The structure of the Hub will be the following

  • Counting a more efficiently license consumption.
    • Windows Server
    • SQL Server Optimization
    • Red Hat Enterprise Linux License
  • Identifying required actions that will lead to license saving
    • Oracle Optimization on clusters
    • Optimum Virtualized Architecture for Oracle Options
    • Named User Subscriptions Optimization
  • Understanding the best contractual terms
    • Oracle Consumption Summary by Partitioning Rule

More details and related published solutions

Most of optimization reports have already been released and the SAM Optimization Hub will articulate the value of the reports around two pillars

  • Understanding how much you saved with ITAM
  • Understanding how much more you could save by taking action

Licenses where money has been saved through sophisticated ability of ITAM to compute consumption

The complex optimization calculations (Windows Server, SQL Server, Red Hat) are released first as reports (with possibility to allocate according to the calculated optimizations) and will later be included in the optimization logic of the license consumption algorithm.

Windows Server Optimization

Windows server has multiple editions (Standard and Data Center), can be licensed with System Center (Core Infrastructure Server (CIS)), has complex rules (90 day mobility rules for Windows Server Standard)... in the end, everybody tends to license ESX servers with Windows Server Data Center edition, or counts the number of VMs in clusters ("worst case") to decide when to use Windows Server or CIS Data Center or the Standard editions.

The Windows server Optimization report (released in 2021R1.4) computes the optimal license needs based on the 90 day peak number of Windows Server VMs, host per host. It also identifies when CIS is required. The report gives the total true up as well as the savings, host per host but also globally of the optimal license (when it is Standard edition) versus the classical and easy "Data Center" edition choice. The report can be implemented from this community solution.

Windows Server Optimization.png

SQL Server Optimization

SQL Server is a different story. SQL Server Enterprise can cover either Enterprise or Standard editions installations. A quick and expensive approach is to cover all VMs in a ESX with SQL Server Enterprise edition as soon as one VM is installed with the Enterprise edition. 

The SQL server Optimization report (released in 2021R1.3) computes the optimal license needs evaluating host per host the "everything in Enterprise editions versus each VM licensed separately with the installed edition". he report gives the total true up as well as the savings, host per host but also globally of the optimal license (when it is Standard edition) versus the classical and easy "Enterprise" edition choice. The report can be implemented on premise from this community solution.

SQL Optimization.png

Red Hat Enterprise Linux Optimization

RHEL, like Windows Server has a cheaper edition (Server edition) that requires more licenses if you have more VMs on an host and a more expensive (Data Center Node edition) that covers an unlimited number of VM. No mobility rule for using the RHEL Server node edition on ESX server but you have the constraint that a cluster must be consistently licensed in a unique edition.

The Red Hat Enterprise Linux Optimization Report (released with 2021R1.2) compares for each cluster the cost of using one or the other option, computes the optimal cost and provides the saving when the optimal license for a host is Server Node edition. The report can be implemented on premise from this community solution.

RHEL.png

 Licenses where money could be saved by taking action

Oracle Optimization reports

Oracle, with the terrible "soft partitioning rule", can cost you millions if you make the mistake of having a VM with an expensive option in a large cluster.

The Oracle Optimization on Clusters  report (Released in 2021R1) computes cluster per cluster the "total cost" and "total waste", comparing, for database and option per option the installed cores and licensed cores. The report can be implemented on premise from this community solution.

OracleOptimizationOnClusters.png

The Oracle License Consumption Details And Optimizations (Released in 2021R1) provides all details on Oracle Processor license consumption, it highlights all optimizations possibilities, host per host and provides a charge back consumption and value at installed devices (particularly on VMs) level. The report can be implemented on premise from this community solution.

ORCLCsnDetails.png

  

The ideal Oracle VMWare architecture is when all VMs with consistent installed and used options are regrouped in specialized clusters. The Optimum Virtualized Target Architecture for Oracle Options report (Released in 2021R1.1) provides the full details of this target architecture along with the consumption saving.  The report can be implemented on premise from this community solution.

Optimum Target Architecture.png

Two other reports on Oracle (Released in 2021R1.1) provide simulations on the consumption and financial impact for the database and options Licenses on the various soft partitioning levels (cluster, vCenter, all vCenters...), for summary and details .

ORCLSimulSummary.png

The Named Users Subscription optimization report

(Released in 2022 R1.4) will provide a user per user analysis of the installed and used applications, in the context of active subscriptions for all named users licenses.

It will also provide recommendations for downgrades and financial analysis on savings for Adobe and M365. The Adobe Optimization Report can be found in the Adobe Subscriptions Optimization Report & Adobe Portal Users importer KB article.

The Named User License consumption and Optimization report KB article provides the code of the released version for on premise customers.

NamedUserOptimization.png

Towards more Cloud Intelligence

The Cloud Migration License Impact Simulation Engine (Planned for Q1 2023) will allow to create simulations for migration of VMs to Cloud Service Providers.

You can choose the candidate VMs, determine the Cloud Service Providers you intend to migrate the VMs to and save the simulation. The Simulation engine will compute for all licenses in scope the consumption before and after the migration. You will get a view on the complex to anticipate and major licensing cost of moving to the Cloud.

Cloud Migration License Impact Simulation Engine.png

Other useful Community pointers

Take a step back on licensing

In the SAP Licensing— translate 50 expensive shades of grey into cheaper black and white! blog ost, you will understand the subtleties of SAP licensing ambiguities and optimization.

The When good intentions, good will and sincerity lead to licensing nightmares and financial waste blog post gives a view on how licensing rules have tried to adapt to technological sophistications and how they have themselves become unmanageable for human beings.

RTFM: Read the fantastic Manual!

Flexera One ITAM / FlexNet Manager has an extremely detailed Online Help, that gives you from the context of any page the full explanations on all fields and processes from the UI. Please think about clicking on the "?" when one the out of the box reports. Each report is documented in great details, for instance: the Windows Server Optimization report. Please also check the Features by Release documentation that contains the full history.

The Online documentation, in its root folder (IT Asset Management Help folder on top) contains a number of deep dive documentations.

Some hands-on best practices documentation have been initially written by Flexera Services: The Practice Guides on Software License Optimization, Microsoft, Oracle, IBM, Adobe and SAP can be found in the Flexera Learning Center, the  Using FlexNet Business Adapters documentation provides practical view on the use of the Business Adapter Studio.

More generally, the Flexera Learning Center contains excellent resources and recordings if you want to learn more about Flexera ITAM and Software Asset Management.

Managing Automatically embedded Java Instances

The License exemption by file path (Released in 2021R1.4) automates exemptions for Java installations recognized thanks to file evidences on exempted paths. The Automating the Management of Embedded Java instances solution allows to anticipate the feature with a less sophisticated implementation that recognizes these instances separately as "Java embedded" and excludes them from

Operations guide

The SAM Operations Guide, that is a complement (and shorter version) to the Practice guides, provides the big picture and detailed guidance on starting a SAM project and managing SAM operations.

A detailed documentation on Managing unrecognized applications is also provided in this article.

Creating advanced automations in FNMS cloud

The Allocation Automation Example for FNMS Cloud  gives a sophisticated example of automation for locations calculation for servers based on they IP subnet, domain or server name. The solution reads the data in Flexera One ITAM using the GetCustomViewResult SOAP API (all details are provided on how to activate this API) and using a local SQL instance for running advanced SQL scripts.

Note that a similar REST API was release in June 2022

 

Cloud Integration Architecture (1).png

 

Example of use of the new License consumption & Charge Back REST API

This KB article gives you the pointer to the newly released License Consumption (and charge back) REST API (Cloud only), some explanation and an Example of a PowerShell script that queries the API, license per license, "flattens" the JSON output and goes through paginated pages.

Example of use of the new reportsExecute REST API

This KB article gives you the pointer to the newly released reportsExecute REST API (Cloud only), some explanation on this API that retrieves the output of any report created from the web client and an Example of a PowerShell script that queries the API, license per license, "flattens" the JSON output and goes through paginated pages.

Any object (Inventory device, installed application, license result, contract, purchase) with any possible link can now be queries through a REST API call! 

A License Duplication Wizard

When you need to create multiple similar licenses (for instance in the case of restricted licenses), it can be long to use the license creation wizard again and again. This License Duplication Wizard allows to create the wished number of copies after selecting licenses.

Nutanix and RHEV Inventory Connectors

A  KB article gives the details for collecting data from Nutanix or Red Hat RHEV cluster and integrating the data into FNMS / Flexera One ITAM

  • Create or update clusters
  • Create or update Hosts
  • Link VMs to Hosts and Host to clusters

2 Solutions to manage Application streaming technologies' license consumption

The August 2023 SAM Best Practice Webinar covered the management of licenses for applications streamed on Citrix or Microsoft RDS servers, but also the management of these of license requirement for these streaming technologies, that cannot just be handled by monitoring installed applications. The Importing Microsoft RDS CALS and Allocating to Licenses (Current/Optimal) and Importing Citrix Console License Consumption Information and Allocating to licenses to ITAM / FlexNet Manager  KB articles provide an end to end solution to integrate with the RDS License Servers and Citrix console and reflect consumption in ITAM.

(28) Comments
craig_hundley
By
Level 3

Thank you for this!  We have been looking for something exactly like this Best Practice Hub!  Looking forward to seeing more.  And looking forward to building out our best practices, using this HUB, within our organization!!  Well done!!

nrousseau1
By Level 10 Champion
Level 10 Champion

Thanks @craig_hundley  for the feedback, expect this document to evolve and report on the delivered features that will include the share on premise customizations (custom SQL reports particularly!).

Best regards,

Nicolas

dmathias
By
Level 7

Hi Nicolas,

This appears not to be a valid hyperlink.  Could you please review and update the link?

When good intentions, good will and sincerity lead to licensing nightmares and financial waste

 

Thanks, David Mathias

NTT DATA Services

 

nrousseau1
By Level 10 Champion
Level 10 Champion

Thanks David for the feedback and sorry I messed up the link. I have just updated it in the post: https://www.flexera.com/blog/it-asset-management/sam-licensing-nightmares-financial-waste/

Thanks,

Nicolas

nrousseau1
By Level 10 Champion
Level 10 Champion

May 10th 2022: added the link to the May SAM Best practice Webinar (Customizing ITAM/FNLS) and a link to a new KB article (example to License Consumption and Chargeback call)

dmathias
By
Level 7

Hi again, @nrousseau1 

This time through reading the article, I noticed the Citrix hyperlink takes me to a 404.

https://docs.flexera.com/fnms/EN/WebHelp/index.html#topics/Rep_CitrixVirtDesktopsInstallEvid.html

 

Thanks, David

JingQian
By Level 3 Flexeran
Level 3 Flexeran

Hi @dmathias (and @nrousseau1),

The mentioned 404 page as well as another page in the Online Help have been replaced by two new pages recently:

 

This change is due to an update in ITAM 2022 R1.1 to include VMware Horizon non-persistent VDI data in the Citrix Virtual Desktops File and Installer Evidence reports.  Please see this entry in the Features by Release doc: The Citrix Virtual Desktops File and Installer Evidence reports have been updated to collect VMware Horizon non-persistent VDI data 

 

Thanks,
Jing

dmathias
By
Level 7

OK - @JingQian - thank you for the update.  Unfortunately those links reference a product we do not use.  My team is still using FNMS on-prem 2019 R1.

Best, David

JingQian
By Level 3 Flexeran
Level 3 Flexeran

Hi @dmathias - The Citrix evidence reports were introduced into FNMS On-Prem in 2020 R2 (ref) . 

You could take a look at this topic Citrix Virtual Desktops Installer Evidence report in the 2020 R2 On-Premises Online Help. (However, the report can't be generated in 2019 R1.)

nrousseau1
By Level 10 Champion
Level 10 Champion

June 17th

Added the link to the June session (Integrating ITAM with a CMDB) and the link to two new transparency custom SQL reports:

nrousseau1
By Level 10 Champion
Level 10 Champion

July 7th: Added more details on the SAM Data Transparency Hub (vendor centric view), new mockups.

caldwellb
By
Level 6

@nrousseau1   Is the reporting Hub going to be released to On Premise, Cloud or both?

jasonlu
By Level 7 Champion
Level 7 Champion

This is a great article.

I hope some of those custom SQL reports make to FlexeraONE, and are accessible via the API.

j

 

nrousseau1
By Level 10 Champion
Level 10 Champion

July 12th:

Two additions. Link to the last SAM Best Practice Webinar material (management of containers), link to the new KB article that explains how to use the new generic reportsExecute REST API.

To @jasonlu, any report created from the web client is now available through REST APIs. The Flexera advanced reports (all the optimization reports, application transparency) will progressively be added. These report need a special description xml that was not delivered so far. The first report with this ability is the "Windows Server Optimization Flat Report" that can be used for automated allocations. This one will be part of 2022R1.4 and will be available through the GetCustomViewResult SOAP API to start.

To @caldwellb , the Hubs will be available for on premise and Cloud. It is to be expected that more sophisticated reporting capabilities will soon be available on the Flexera One ITAM only, but the hubs (and their reports) will be available on both on premise and cloud.

nrousseau1
By Level 10 Champion
Level 10 Champion

August 23rd 2022:

Added the link to the August SAM Best Practice Webinar (Reporting), the link to the article providing the code for the Custom SQL Report: "Named User Optimization" (released in ITAM 2022R1.4) and a pointer to the Nutanix and RHEV Inventory Connectors KB article.

nrousseau1
By Level 10 Champion
Level 10 Champion

September 27th 2022:

Refreshed the SAM Operations mockup (that includes trends). Changes to the planned dates from the SAM Optimization and SAM Operations hubs.

Added the link to the September SAM Best Practice Webinar sessions.

nrousseau1
By Level 10 Champion
Level 10 Champion

November 15th, 2022:

Added the link to the November SAM Best Practices Webinar recoding  (2022R2 features deep dive) and the link to the newly published Flat List Of License Restrictions report that will be part of the SAM Data Transparency Hub.

nrousseau1
By Level 10 Champion
Level 10 Champion

Link to the January SAM Best Practice Webinar recording and added updated Hubs screen shots and mockups and information on released reports.

nrousseau1
By Level 10 Champion
Level 10 Champion

Added refreshed screenshots for the SAM Operations Hub (planned for Q1 2023). Added a new section: "Toward More Cloud Intelligence" that introduces to the Cloud Migration License Impact Simulation Engine planned for Q1 (Cloud customers). Also added the link to the February 22 SAM Best Practices Webinar  on allocations and exemptions

nrousseau1
By Level 10 Champion
Level 10 Champion

Updated the link to Nutanix and RHEV solutions to point to KB document: https://community.flexera.com/t5/FlexNet-Manager-Knowledge-Base/Nutanix-and-RHEV-Inventory-Connectors/ta-p/266196

 

MurrayPeters
By
Level 7

Hi Nicolas - when I follow the link to the Nutanix/RHEV KB article I just get an Access Denied error (i'm definitely logged into the community and can browse everything else).  Is it possible that KB is not yelly fully/publically accessible?

https://community.flexera.com/t5/FlexNet-Manager-Knowledge-Base/Nutanix-and-RHEV-Inventory-Connectors/ta-p/266196

Access Denied.png

Vmintzikos
By Level 6 Flexeran
Level 6 Flexeran

Hi @MurrayPeters ,

It does look like that specific document is in an internal location not publicly accessible. I'll defer to @nrousseau1 to comment/address.

Cheers

Vas

nrousseau1
By Level 10 Champion
Level 10 Champion

Hello @Vmintzikos  & @MurrayPeters ,

Sorry, the Nutanix document has been moved twice between internal and external resources. This is fixed now!

I also updated the SAM Publisher Hub details.

nrousseau1
By Level 10 Champion
Level 10 Champion

Added link to the May 2023 SAM Best Practices Webinar on Java recording and refreshed release date information for hubs.

nrousseau1
By Level 10 Champion
Level 10 Champion

Added links to the August 2023 SAM Best Practice Webinar (Managing streamed applications (Citrix, Horizon, App-v)) and pointers to two new KB articles at the end of the post:   Importing Microsoft RDS CALS and Allocating to Licenses (Current/Optimal) and Importing Citrix Console License Consumption Information and Allocating to licenses to ITAM / FlexNet Manager.

Added a screenshot of the Application Publishers screen and modified release date for the SAM Publisher Hub dashboard: October 2023.

dbeckner
By Level 10 Champion
Level 10 Champion

"The License Consumption and unlicensed Product Risks report (Released in 2022R2) mixes License Consumption data with unlicensed products counts to provide a single pain of glass for your compliance and license gaps."

 

We do not see this report on FNM 2022 R2. Was it not shipped with that version?

ChrisG
By Community Manager Community Manager
Community Manager

@dbeckner - yes, the report should be available in any FlexNet Manager Suite 2022 R2 or later installation. Here is a link to the documentation about the report and where it can be found in that specific version: https://docs.flexera.com/FlexNetManagerSuite2022R2/EN/WebHelp/index.html#topics/Rep_LicensesComplianceAndRisks.html

dbeckner
By Level 10 Champion
Level 10 Champion

Thanks Chris. I ended up finding it, but it wouldnt let me delete my comment. I appreciate the quick response.