A new Flexera Community experience is coming on November 18th, click here for more information.
Hi All,
Under the Red Hat Subscription guide, If you are deploying Red Hat Enterprise Linux in a virtual environment, your subscriptions are based on the number of virtual instance-pairs running the product.
(https://www.redhat.com/en/resources/Linux-rhel-subscription-guide)
So based on the above, if I have 10 Red Hat VMs it should consume 5 licenses.
I have been trying to configure this in FNMS 2018 R2 but cannot find an appropriate license type that allows this type of consumption (2 to 1).
I have read the Flexera article "Configuring Red Hat Licenses in FlexNet Manager" but don't believe it works for this specific use case as it's based on Microsoft Processor Core and licensing the Host first.
Thanks
‎Jun 23, 2020 12:41 AM
Hi William,
I encourage the raising of an enhancement request to support RHEL more directly, but in the meantime here is some information which may help you. For the 2 Virtual node licenses I see two options, both of which have pros and cons:
Option 1: Simply add a unit quantity of 2 to the Red Hat Purchases and associate with a device license. In this way each purchase will cover 2 Virtual servers. You will have to use allocation or perhaps restriction to make sure the VMs consume this license (and you can scope the license to the specified Cloud if any of your VMs are cloud based) but the calculations will be correct.
The downside of this is related to any re-assignment of purchases between the Virtual space (where you cover 2 VMs per license) and the non-virtualised space (where the same licenses can be used to cover 2 sockets of a standalone server), as you will have to adjust the unit quantity of the purchase as you re-assign (you do not want a unit quantity of 2 for that purchase as it could lead to a single purchase covering to single socket servers, or errors for servers with an odd number of sockets, which would be incorrect, if a little unlikely).
Option2 - is to use the following configuration. The downside of this is that it will not work for VMs which are not mapped to a VM Host (including any in the cloud). But, if your VMs are on-premise and you haver good coverage in terms of VM to VM Host mapping, this could be the way to go.
Anyway, I add a PDF which may be helpful.
Kind Regards,
Stewart
‎Jun 23, 2020 03:31 AM - last edited on ‎Apr 01, 2022 04:40 AM by ChrisG
There is current an enhancement ticket == RHEL Server Licensing in the Cloud
‎Jun 23, 2020 02:13 AM
Hi Willyin,
The Word document attached to the KB article that you refer to actually recommends configuring three different license types when managing Linux RedHat licenses in FNMS:
Unfortunately, on a license in FNMS, you cannot configure if the license should be used for virtual machines (VMs) or for physical computers only. Because of this, FNMS is not able to assign the correct license type automatically.
Assignment of licenses to computers and to virtual machines running Linux RedHat needs to be done manually, or by using a Business Importer. In another parallel discussion in this forum, @spierce provides very nice instructions on how the assignment of licenses to computers can be done in a "semi-automatic" way. Using a Business Importer would allow you to fully automate this process though.
After RedHat licenses have been assigned to computers and to VMs correctly, FNMS will be able to calculate the license consumption.
For getting the total consumption of RedHat licenses, you most likely have to summarize the consumption data for more than one RedHat license.
‎Jun 23, 2020 03:12 AM - edited ‎Jun 23, 2020 03:23 AM
Following up here,
Thanks for helping here!
Automated process is the best solution, thus please share the enhacement number, so I can also vote and track it.
Thanks in advance!
‎Jun 18, 2021 03:08 AM - edited ‎Jun 18, 2021 03:10 AM
‎Jun 18, 2021 03:11 AM
Hi William,
I encourage the raising of an enhancement request to support RHEL more directly, but in the meantime here is some information which may help you. For the 2 Virtual node licenses I see two options, both of which have pros and cons:
Option 1: Simply add a unit quantity of 2 to the Red Hat Purchases and associate with a device license. In this way each purchase will cover 2 Virtual servers. You will have to use allocation or perhaps restriction to make sure the VMs consume this license (and you can scope the license to the specified Cloud if any of your VMs are cloud based) but the calculations will be correct.
The downside of this is related to any re-assignment of purchases between the Virtual space (where you cover 2 VMs per license) and the non-virtualised space (where the same licenses can be used to cover 2 sockets of a standalone server), as you will have to adjust the unit quantity of the purchase as you re-assign (you do not want a unit quantity of 2 for that purchase as it could lead to a single purchase covering to single socket servers, or errors for servers with an odd number of sockets, which would be incorrect, if a little unlikely).
Option2 - is to use the following configuration. The downside of this is that it will not work for VMs which are not mapped to a VM Host (including any in the cloud). But, if your VMs are on-premise and you haver good coverage in terms of VM to VM Host mapping, this could be the way to go.
Anyway, I add a PDF which may be helpful.
Kind Regards,
Stewart
‎Jun 23, 2020 03:31 AM - last edited on ‎Apr 01, 2022 04:40 AM by ChrisG
Also, as mentioned in another post, you can get creative with Core points and Processor points licenses in order to restrict the license to Virtual Servers only, and can even make them function like a device license.
Restriction can be acheived through the addition of a specified model in the points rule you create which will restrict the license to models such as 'VMWare Virtual Platform'.
Adding a points or core factor like 0.000001 will always result in the consumption for that device being 1 (ie just like a device license).
So for the Red Hat 2 VM license example, we could use this approach to create a device license restricted to VMs, which when coupled with a Purchase unit quantity of 2 would give you what you need. You could add a second rule restricted to specific clouds, but with no model specified, to cover cloud instances.
Regards,
Stewart
‎Jun 23, 2020 03:54 AM
Another note on this: in the post above I mention the following when using a purchase qty of 2 to manage the 2 VM license:
The downside of this is related to any re-assignment of purchases between the Virtual space (where you cover 2 VMs per license) and the non-virtualised space (where the same licenses can be used to cover 2 sockets of a standalone server), as you will have to adjust the unit quantity of the purchase as you re-assign (you do not want a unit quantity of 2 for that purchase as it could lead to a single purchase covering to single socket servers, or errors for servers with an odd number of sockets, which would be incorrect, if a little unlikely).
Actually we can get around this by creating a points ruleset like the following for the 2 Socket license in FNMS. This way you can always apply a unit quantity of 2 to the purchase, whether it is assigned to the 2 Socket license or the 2 VM license and can -re-assign the purchases freely between the 2 licenses as needed.
So the purchase looks like:
Regards,
Stewart
‎Jun 23, 2020 05:24 AM
Thanks Stewart, the pdf you provided was very helpful.
We have a mix of VMs on the public cloud, so my only option is to use the Purchase Unit Quantity method which did cross my mind previously.
An enhancement would be ideal to cater for this use case, but until then we will make best use of the current options.
Again, thank you and appreciate your insight.
Regards,
Will
‎Jun 30, 2020 07:28 PM
Hi, I attach an updated .ppt which recommends the use of the Unit Quantity = 2 approach to license VMs and also provides the points rule table I provided later in the thread so that your Socket Pair license for standalone physical servers can also consume purchases with a unit quantity of 2.
Hope this helps.
Stewart
‎Jul 29, 2020 10:19 AM
Hello Stewart, tested this solution on 30-07.
Two licenses created, One license with license type device (unit quantity 2 on purchase) and one license with license type processor points (unit quantity 2 on purchase) with your customised Points Rule Set.
It works. Thank you for this work arround / solution.
Regards, Frank07
‎Jul 30, 2020 07:11 AM
User | Count |
---|---|
8 | |
6 | |
3 | |
3 |