cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multiple NIC to SVM

Dear Members,

 

Did any one try adding multiple nics to SVM? Do you have procedure for Ubuntu based VM to have multiple NICs?

Thanks & Regards,
Fawad Laiq
(1) Solution

Hi, 

You can follow the below article to configure your Network Adapters. Please make sure you are configuring the correct one.

https://www.serverlab.ca/tutorials/linux/administration-linux/how-to-configure-centos-7-network-settings/

I hope this will resolve your issue. 

Regards,

Raheel 

 

View solution in original post

(3) Replies
raslam
By Level 7 Flexeran
Level 7 Flexeran

Hi Fawad, 

Yes, you can add multiple NIC adapters to you SVM Virtual Appliance. Please follow the below steps. 

  • Go to your Hyper V Manager and turn off the SVM virtual appliance.
  • Right-click on the SVM virtual appliance and click settings.
  • Click on the Add hardware tab and select Network Adapter and press Add.

    Capture 1.PNG
  • Specify the Configuration of Network Adapter. 
    Capture2.PNG
  • Turn on your SVM Virtual Appliance.
  • Run the following command 'lshw -class network -short' to verify the Network Adapters.
    Capture3.PNG

Best Regards,

Raheel 
Senior TSE

 

 

How about configuration of second adaptor IP as there would not be any UI for that like what we have for normal NIC.
Thanks & Regards,
Fawad Laiq

Hi, 

You can follow the below article to configure your Network Adapters. Please make sure you are configuring the correct one.

https://www.serverlab.ca/tutorials/linux/administration-linux/how-to-configure-centos-7-network-settings/

I hope this will resolve your issue. 

Regards,

Raheel