About atikah_rusdi

lcfernandez · ‎Jan 19, 2021

Is there any change about this topic?. We are in the same escenario than the other guys. Regards.

JohnSorensenDK · ‎Apr 30, 2020

@jjoaquin You create targets after clicking on Targets in the Discovery and Inventory Rules view: And you then click on Targets in the Rule builder wizard to select them: Thanks,

ChrisG · ‎Jul 20, 2019

@atikah_rusdi - you could try configuring a report listing Installation records that includes the Access mode column. This column will indicate whether the installation is locally installed, or accessed remotely (which will typically be through Citrix, but could be through some other remote access technology if you also have other technology in your environment). (Another tip: If you have a follow-up question which is not the same as the query raised at the start of the thread, it can help to start a new discussion thread in the forum. This will help your question get more visibility in Flexera Community.)

spierce · ‎May 14, 2019

Because we are aiming to bring in the Sub-Capacity license consumption from ILMT the frequent scanning is not relevant in this case. It is potentially relevant that the devices have the Flexnet Agent and also come in from the ILMT import. It is not clear to me from your response if you see any devices where the calculation is 'Internal' (which would indicate device duplication and/or the device inventory coming only from Flexnet inventory). This can be seen in the Consumption tab of the license and you will need to add a field called 'Calculated by'. If there are no devices where the Calculated By is 'Internal' then the consumption counts should all add up. Can you confirm where you see the gap? You can extract the consumption tab of the license in question and compare the consumption count you see for each physical device to that you see in ILMT, in order to-pin point where the issue may be.

ChrisG · ‎Apr 23, 2019

The following thread is somewhat related to this discussion (it discusses moving data out of the C:\Program Data directory structure): https://community.flexera.com/t5/FlexNet-Manager-forum/FNMS-move-all-Logs-Readers-and-intermediate-data-to-a-data-drive/m-p/95600#M413

Online Status	Offline
Date Last Visited	‎Oct 08, 2019 02:03 AM

Re: Running a discovery & inventory rule on specific beacon

Re: How to enable Software Metering on existing FNMS agent?

Re: XenApp Integration with FNMS 2017 R3

Re: Inventory data import from ILMT

Re: Changing the folder path during the upgrade

Re: XenApp Integration with FNMS 2017 R3

Re: How to enable Software Metering on existing FNMS agent?

Re: How to enable Software Metering on existing FNMS agent?

Re: How to enable Software Metering on existing FNMS agent?

How to enable Software Metering on existing FNMS agent?

Re: Inventory data import from ILMT

Re: Running a discovery & inventory rule on specific beacon

Running a discovery & inventory rule on specific beacon

Re: Inventory data import from ILMT

Inventory data import from ILMT