cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cloudscape Flexdeploy

Not sure what option to choose. I need the information on the FQDN for the following IP address i.e.

Backup & Growth (34.192.99.153, 34.192.185.36) 

We are putting in FlexDeply implementation and the question came up what is the FQDN for the mentioned IP addresses and if these are really needed for the flexdeploy implementation.

Appreciate your response.

Thanks.

Farooq Qureshi

(1) Solution
If using Flex Deploy, dataup.riscnetworks.com is not required, as that data would be stored locally in the Flex Pod. Backup & Growth is also not required, though recommended in the event there are feature enhancements. As mentioned in the documentation, internet access IS required, outbound from the two appliances via 443 to the following:

orchestration.riscnetworks.com ( 34.192.184.110, 34.192.195.90 )


initial.riscnetworks.com ( 34.192.43.78, 34.192.198.28)



app1.riscnetworks.com (34.192.198.73 )


Best regards,
Sam Barbeau

View solution in original post

(4) Replies
rmiller1
By Level 6 Flexeran
Level 6 Flexeran

Hi Farooq,

I'm not clear on what your deployment approach is, but when using the FlexDeploy option, the "application server" will be hosted in your environment, rather than Flexera Cloud. Therefore, the external connections that you mention in the 

https://docs.flexera.com/foundationcloudscape/help/RCDeployReq.htm#overview_3961184347_1118536

Are not typically required. If you contact your Flexera representative, this can be clarified further.

 

regards,

 

R.Miller

Thanks for the response.

I will contact the representative for sure.

Our deployment approach is Flexdeploy.

I have been told, the access you mentioned is needed for licenses activation, install, patches ( even for FelxDeploy ) but for the Backup and Growth, we were not very clear and looking for FQDN. Are you saying, none of the access ( or internet access ) is needed mentioned in the link you provided i.e.

TCP Port 443 outbound to the following:

 orchestration.riscnetworks.com ( 34.192.184.110, 34.192.195.90 )
 initial.riscnetworks.com ( 34.192.43.78, 34.192.198.28)
 dataup.riscnetworks.com ( 34.192.12.37, 34.192.197.132 )
 app1.riscnetworks.com (34.192.198.73 )
 Backup & Growth (34.192.99.153, 34.192.185.36)

 

 About the NTP, it does say local NTP server can be accessed.

Appreciate your insight.

Thanks.

If using Flex Deploy, dataup.riscnetworks.com is not required, as that data would be stored locally in the Flex Pod. Backup & Growth is also not required, though recommended in the event there are feature enhancements. As mentioned in the documentation, internet access IS required, outbound from the two appliances via 443 to the following:

orchestration.riscnetworks.com ( 34.192.184.110, 34.192.195.90 )


initial.riscnetworks.com ( 34.192.43.78, 34.192.198.28)



app1.riscnetworks.com (34.192.198.73 )


Best regards,
Sam Barbeau