@jbforster , 11.17 onwards a new functionality of Message Diagnostic was introduced .These messages are intended used to diagnose technical problems that occur During the debugging process.
To Disable these diagnostic messages if required ,set the below parameters
ls_diagnostics_enabled=0 at server side and LM_A_DIAGS_ENABLED=0 at client side
Fix
The issue has been fixed in 11.17.1(2020 R3),hence if 11.17 is being used then kindly plan an upgrade to 11.17.1
(If my response assists with your questions , then please click "ACCEPT AS SOLUTION" or 'Kudos' so that it help others.)
@jbforster , 11.17 onwards a new functionality of Message Diagnostic was introduced .These messages are intended used to diagnose technical problems that occur During the debugging process.
To Disable these diagnostic messages if required ,set the below parameters
ls_diagnostics_enabled=0 at server side and LM_A_DIAGS_ENABLED=0 at client side
Fix
The issue has been fixed in 11.17.1(2020 R3),hence if 11.17 is being used then kindly plan an upgrade to 11.17.1
(If my response assists with your questions , then please click "ACCEPT AS SOLUTION" or 'Kudos' so that it help others.)
This can be enabled in the file lsvendor.c which is present inside the machine independent folder i.e machind . Set ls_diagnostics_enabled=1 to enable it .
Only the daemon binary was delivered by the vendor. Is there anything I can do at our licensing server to prevent "DPLT" logger messages in the debug log without enabling " ls diagnostics enabled=0" in the rouse code? Thanks
By default ls _diagnostics_enabled will be disabled i.e set to 0 so it will automatically prevent the DPLT logger messages in the debug log , Only when you would want that functionality to be used you can set ls_ diagnostics_enabled =1 . (Enable's Logger messages). Hope your query is answered.
