CinVVL
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 18, 2014
02:51 AM
Change icon
Hi,
Is there any way to change the icon shown in the attached image.
Thanks,
CinVVL
Is there any way to change the icon shown in the attached image.
Thanks,
CinVVL
10 Replies
jerome_IA
Flexera beginner
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 24, 2014
03:19 AM
Re: Change icon
Hello,
The icon can be changed by altering IAClasses.zip file in the resource folder under IA Installation path.
The icon should be the com\zerog\ia\installer\images\iaIcon.png
You will not find any entry from flexera site excepted that one: http://flexerasoftware.force.com/articles/en_US/INFO/Q000049
--Jerome
The icon can be changed by altering IAClasses.zip file in the resource folder under IA Installation path.
The icon should be the com\zerog\ia\installer\images\iaIcon.png
You will not find any entry from flexera site excepted that one: http://flexerasoftware.force.com/articles/en_US/INFO/Q000049
--Jerome
CinVVL
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 25, 2014
12:36 AM
Re: Change icon
jerome_IA wrote:
Hello,
The icon can be changed by altering IAClasses.zip file in the resource folder under IA Installation path.
The icon should be the com\zerog\ia\installer\images\iaIcon.png
You will not find any entry from flexera site excepted that one: http://flexerasoftware.force.com/articles/en_US/INFO/Q000049
--Jerome
Hi Jerome,
Many thanks for the reply!
But I am unable to fix this.. 😞 I replaced the iaIcon.png with some other image in the zip file and built the project.
I ran the setup and found no difference.. Can you please help me.. I am not sure where I am going wrong!
Thanks in advance!!
jerome_IA
Flexera beginner
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 25, 2014
02:30 AM
Re: Change icon
Hi,
Maybe you should try to do the same change in the IAClasses.zip located in the root installation folder of Installanywhere where you are building.
Having both:
IAClasses.zip
resource/IAClasses.zip
should do the trick.
Let me know if this help.
--Jerome
Maybe you should try to do the same change in the IAClasses.zip located in the root installation folder of Installanywhere where you are building.
Having both:
IAClasses.zip
resource/IAClasses.zip
should do the trick.
Let me know if this help.
--Jerome
CinVVL
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 25, 2014
03:52 AM
Re: Change icon
jerome_IA wrote:
Hi,
Maybe you should try to do the same change in the IAClasses.zip located in the root installation folder of Installanywhere where you are building.
Having both:
IAClasses.zip
resource/IAClasses.zip
should do the trick.
Let me know if this help.
--Jerome
Thanks a lot for the quick response.
I tried this as well.. but did not help..
Later, I changed the installer icon from the UI. And it got fixed now 🙂
Thanks again!!
jerome_IA
Flexera beginner
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 25, 2014
05:49 AM
Re: Change icon
Yes, you're right if IDE & building is made on windows ... but I'm surprised it didn't worked that way as the default path link to com/zerog/ia/installer/images/iaIcon.png.
Building on linux requires to have the IAClasses altered.
Regards
--Jerome
Building on linux requires to have the IAClasses altered.
Regards
--Jerome
CinVVL
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 25, 2014
10:56 PM
Re: Change icon
jerome_IA wrote:
Yes, you're right if IDE & building is made on windows ... but I'm surprised it didn't worked that way as the default path link to com/zerog/ia/installer/images/iaIcon.png.
Building on linux requires to have the IAClasses altered.
Regards
--Jerome
One more issue I have, please help me..
When I revert back to default icon by clicking Default button available in the UI, the path updates to the default one.
But when I build the setup, instead of getting the default icon, I get the one which I have given the last time.
Is there any cache to be cleared to get rid of this. please let me know.
jerome_IA
Flexera beginner
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 26, 2014
02:38 AM
Re: Change icon
Either you still have the IAClasses.zip files modified and so the iaIcon.png is the wrong one.
Or as you said this is cache issue so you have to restart InstallAnywhere before building.
Or as you said this is cache issue so you have to restart InstallAnywhere before building.
CinVVL
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Feb 26, 2014
04:36 AM
Re: Change icon
jerome_IA wrote:
Either you still have the IAClasses.zip files modified and so the iaIcon.png is the wrong one.
Or as you said this is cache issue so you have to restart InstallAnywhere before building.
I restarted and tried to build.. but no luck..
I am sure I reverted the IAclasses.zip file.. I have the original one..
Amyway.. thanks for the quick response!
m8winn
Pilgrim
- Mark as New
- Subscribe
- Mute
- Permalink
- Email to a Friend
- Report Inappropriate Content
‎Sep 06, 2016
04:23 AM
greetings get to know
CinVVL wrote:
Thanks a lot for the quick response.
I tried this as well.. but did not help..
Later, I changed the installer icon from the UI. And it got fixed now 🙂
Thanks again!!
how to replace