
AdamJW asked a question.
Nothing seems to bring the machine up to date. We did test the connection to the server from the machine and that tested okay. Any Ideas as to why it would not be talking back to the server would be welcomed
Thankyou
Adam

AdamJW asked a question.
Nothing seems to bring the machine up to date. We did test the connection to the server from the machine and that tested okay. Any Ideas as to why it would not be talking back to the server would be welcomed
Thankyou
Adam

Jessica Jurcik asked a question.
Hi, good morning.
We are currently experiencing a communication issue between the Flexera agents and the Beacon. Although the agents are successfully collecting inventory data from the devices, the information is not being transmitted to the platform, preventing the inventory process from being completed.
The behavior observed indicates that local data collection is working as expected; however, communication with the Beacon is not being established. We have already performed several infrastructure and configuration validations without success so far.
Has anyone experienced a similar issue? Is there any additional configuration required on the agents to explicitly point them to the Beacon or associate them with it?
Any guidance or suggestions would be greatly appreciated.
Thank you!
Best Answer
Hi
If the installation and mgssetup.ini file was not correctly setup for the installation you can basically run this command to run the policy download manually
flxconfig.exe --download-server http://beaconserver.xxxx.com
But highly recommended to look into the logfiles as Max mentioned. Sometimes the logs can also reside in your user profile so also check %TEMP%\Managesoft

Hello, good afternoon. Thank you very much for the tips, they were extremely helpful! We encountered an issue with the tenant that had been provided to us, but it has now been resolved. After the update, I ran a new test and, after reviewing the logs and manually triggering the policy download, everything worked as expected. Thank you very much for your support!

Inverno asked a question.
Hello. We've had about 50k machines coming from Ivanti aggregation.
We have installed SNOW agent on 30k of those machines.
Is there a way in Ivanti connector to block those 30k machines to enter the ivanti aggregation, leaving only the non-agent machines to be scanned (around 20k)?
Goal: to reduce aggregation time.
SLM on prem.
Thank you
Best Answer
Hello @Inverno
Good day! Hope you are well.
Looking at the SIM Ivanti Connector documentation, I don't see a way to exclude devices similar to what we have for example in the SIM Microsoft Intune Connector documentation where we can exclude devices.
I think, this will be a good enhancement to the SIM Ivanti Connector and if the community find it interesting and useful too who know this can be included as a new feature in the coming releases.
Give it a go and raise it as an Idea via the Snow Ideas Board, here's the KB article explaining more about it How To: Use the Snow Ideas Board to create, vote and discuss Snow product Ideas and enhancements
Hope that helps.
Kind regards,
Randy Teng

Hello @Inverno
Good day! Hope you are well.
Looking at the SIM Ivanti Connector documentation, I don't see a way to exclude devices similar to what we have for example in the SIM Microsoft Intune Connector documentation where we can exclude devices.
I think, this will be a good enhancement to the SIM Ivanti Connector and if the community find it interesting and useful too who know this can be included as a new feature in the coming releases.
Give it a go and raise it as an Idea via the Snow Ideas Board, here's the KB article explaining more about it How To: Use the Snow Ideas Board to create, vote and discuss Snow product Ideas and enhancements
Hope that helps.
Kind regards,
Randy Teng

samccroskey asked a question.
We are looking at cleaning up our All Inventory, and we are wondering if for devices that we know have been disposed and will never come back into the environment, should we delete them from All Inventory as we already have the history of the device in All Assets.

I think that some organizations' practice is to clean up inventory by deleting inventory after a pre-configured period of time, e.g. using Flexera One ITAM's built-on capabilities:
Other organizations may leave the older inventory in there without bothering about it.
I would personally prefer to clean the older inventory that is considered redundant (noise) unless there's a business reason for keeping it... However, I would appreciate others to chime in with their experience and recommendations.
Thanks,
John Sorensen

Inverno asked a question.
Hello Snowers. We have a shopfloor computer that has a "Denylisted" application installed, but in this case is needed for business (part of a supplier software bundle).
Is there any way to exclude a device from the Denylist without messing with the report criteria? Or maybe to exclude that particular installation?
Thanks in advance.

SUPRIT asked a question.

Hi Suprit,
If you set your auto-filter in the "Last Scanned" (1) column and then select all (2), do you not see the "Archive computer" entry in the menu?

VNMan01 asked a question.
We experience that this is not the case. We have few PCs that have status Inactive when they are actually in use.
Have check if they have Disable automatic quarantine management enabled, they are not.
Anything can be done here to put these PCs back to Active?
Thanks

I've seen this on the latest version too. Inactive machines with active Q management enable stay as inactive even though they scanned yesterday.
You get also the nice Alert of 14 inactive computers have been inventoried during the last 30 days showing it's not working either.

RohanXSnow asked a question.
I am pretty new to Snow. I have noticed that the Users report in Snow atlas is not discovering all the users and the data is being partial some times. like if there is name, machine name is missing and if there is machine name, user name is missing. What are the areas I need to look? also need any alternate solutions for this problem if there are any

Hi RohanXSnow,
if you use our Snow Agent than all login Users on a computer will be collected
In addition you can configure AD Discovery in Snow Extender or Snow Integration Manager
Hi Adam,
As this is a unique machine on your environment, best advise i could give would be for you to raise a support ticket - https://community.flexera.com/s/support-hub - so the team can look into the snowpack file and the agent and find if something isn't being actioned from the data.
One thing to check though, if you go to the machine record and choose edit - is the "Disable auto editing" option ticked as this can sometime be switch on and stop the quarantine process from actioning (Used for situations like Maternity leave so machines aren't automatically archived or deleted).