Loading
Skip Feed

  1. Removing Freeware from the Unlicensed Application list in Flexera One

    I am looking for a way to remove Freeware from the Unlicensed Application list that is in Flexera One. If I setup a license position for freeware that will remove it from the Unlicensed Application list.  What I was thinking would be the best way to do this was by use the Create a License link from the Unlicensed Application page in Flexera. That would then take you to the next screen were you see the below:

    samccroskey_0-1725905244430.png

    I am not sure what the best practice option is for Purchase type.

    Should I also not worry about maintenance type? Just leave it no or grayed out.

    What is the best practice for the License type? Should it be set for Device or again is there a better option.

    As for the naming the license position would the best practice, be to call it for an example, Microsoft Freeware, Adobe Freeware, etc. and under the Application tap, of the license position, all the freeware apps would be listed.

    Expand Post

    • @samccroskey  

      The best practice for dealing with unlicensed installations with FNMS is to defer all the components and freeware.  The unlicensed installations PIE does not consider installations of deferred applications. 

      From an application status perspective, you also want all your licensed applications to be marked as authorised.

      If you are looking to license every freeware application even though the commercial classification is not enough, eg you have SQL express or specific Oracle Java versions , then we create more specific application licenses like "Microsoft SQL Express (Freeware)" so that there is visibility of the use of this product to the organisation. 

      You don't want to hide those under a generic Microsoft or Oracle Freeware license

      Expand Post

  2. Has anyone been able to connect FOSM and SAP Ariba Procurement module?

    Hi all,

     

    Has anyone been able to connect FOSM and SAP Ariba Procurement module?

     

    SAP have given me some APIs but not sure which one to use as i need to create a custom conenctor.

     

    Any advice would help.

     

    Thanks,

    Dan

    Expand Post

    1 of 2
    • hassan.mohammadi (Flexera Software)

      Hello Dan,

       

      This is quite difficult to confirm, as custom connectors are grouped under generic connectors, and we have a large number of customers using them. Therefore, identifying a specific SAP Ariba Procurement integration by looking at the logs alone is not straightforward.

       

      However, as long as you can access the SAP Ariba Procurement APIs via Postman or a similar tool, you should be able to integrate that with Flexera One SaaS Management (FOSM) using custom connector.

       

      Please note that custom connectors currently focus on retrieving user information and user activity data for application. I assume the SAP Ariba Procurement APIs provide the required information, but this should be validated before proceeding with the integration.

       

      You can also try setting up the integration yourself. If you need any assistance along the way, please raise a support case with Flexera Support, and we should be able to help with the setup and configuration.

       

      Thanks,

      Hassan

       

      Expand Post

    • JohnSorensenDK (Flexera Software)

      @mevisut.silapavilawan​ 

      I can see that you're working with Flexera Support on this issue. Please inform the forum members of its resolution if you think others would benefit from it.

       

      Thanks,

      John Sorensen

      Expand Post

  3. Important Flexera Beacon security beacon update IOK-2107311/CVE-2026-110390 – action required

    An important update is being made to the Flexera Beacon component used by Flexera One and FlexNet Manager Suite. This update will improve the beacon component's security.

    The update may require action to be taken on beacons in the organization you manage.

     

    Why these updates are being made

    These updates address a security vulnerability affecting certain Flexera Beacon deployments. The issue affects Beacon deployments for Flexera One and FlexNet Manager Suite.

    See the following Security Advisory for details: Security Advisory: Flexera Beacon Security Update (CVE-2026-110390).

     

    What you need to do

    Follow the recommended actions as detailed in the Security Advisory, including:

    1. Apply the latest beacon update immediately, as per guidance on the following page: Flexera Beacon security hotfix IOK-2107311.
    2. Review beacon configuration against security best practices:

     

    Where to get additional information

    If you have any questions about this matter, please contact Flexera Support. We are here to help.

    Expand Post

    romanmensch likes this.

  4. Important Flexera Beacon security beacon update IOK-2107311/CVE-2026-110390 – action required

    An important update is being made to the Flexera Beacon component used by Flexera One. This update will improve the beacon component's security.

    The update may require action to be taken on beacons in the organization you manage.

    Why these updates are being made

    These updates address a security vulnerability affecting certain Flexera Beacon deployments. The issue affects Beacon deployments for Flexera One.

    See the following Security Advisory for details: Security Advisory: Flexera Beacon Security Update (CVE-2026-110390).

     

    What you need to do

    Follow the recommended actions as detailed in the Security Advisory, including:

    1. Apply the latest beacon update immediately, as per guidance on the following page: Flexera Beacon security hotfix IOK-2107311.
    2. Review beacon configuration against security best practices: Beacon Security Best Practices.

     

    Where to get additional information

    If you have any questions about this matter, please contact Flexera Support. We are here to help.

    Expand Post

  5. Tag value is empty but RBD still seems to be true when using "does not equal" with no value.

    Hi, I'm pretty sure this rule worked fine a week or more ago but currently it is not working as expected any more.

    I have resources that don't have a ServiceOwner tag. The rule is to check that "ServiceOwner does not equal (ignore case)" and an empty value in the field.

    After that I have a catch-all rule that assigned "Missing Owner" for everything that does not pass the main rule.

     

    However, I get resources that get the rule to deliver an empty value.

    Has something changed in the rule evaluation for empty values? Or is there another way to test for resources without a certain tag or an empty value?

    Thanks for any help.

     

     

     

    OR

    ├─

    Tag ServiceOwner

    does not equal (ignore case)

    └─

    Tag ServiceOwner

    does not equal (ignore case)

    None

     

    Assign value from dimension

    ServiceOwner

     

    Expand Post

    1 of 2
    • I think I worked out what has happened

       

      When I started with Flexera in Sept/Oct the rule ServiceCategory="" included the lines when ServiceCategory was missing as key, but it does not any more. Now this statement requires ServiceCategory key to exist and then checks whether the field is empty.

       

      Similarly before the rule 'ServiceCategory does not equal "" ' required ServiceCategory tag to exist and being empty but it did not include the lines the rows when ServiceCategory key is missing. Now this one does include these cases.

       

      Basically the rule that make missing tag key turn True switched sides.

       

      I updated my rules accordingly and it's all working again. Better not raise a ticket and have it switched back :)

      Expand Post

  6. what is the graphql query for the catalogrelatedmanufacturer dataset in ITV
    Question with a best answer.

    Best Answer

    @terrancereiff​ 

    An easy way to find GraphQL query syntax is to use the Data Explorer functionality, and you can then use the column chooser to extend the attributes you need:

    imageIn above example:

    query {

     catalog {

      manufacturers(limit: 10) {

       id

       name

       website

      }

     }

    }

     

    Thanks,

    John Sorensen

    Expand Post
    JohnSorensenDK by JohnSorensenDK (Flexera Software)

    • JohnSorensenDK (Flexera Software)

      @terrancereiff​ 

      An easy way to find GraphQL query syntax is to use the Data Explorer functionality, and you can then use the column chooser to extend the attributes you need:

      imageIn above example:

      query {

       catalog {

        manufacturers(limit: 10) {

         id

         name

         website

        }

       }

      }

       

      Thanks,

      John Sorensen

      Expand Post
      Selected as Best

End of Feed
End of Feed
8 Chatter Feed Items
ALL CONVERSATIONS
UNSOLVED
Unanswered Questions
Skip Feed
  1. MercedesO (Flexera Software) asked a question.

    [Reminder] Submit Your Questions for Our Microsoft 365 License Data Q&A

    Hi everyone,

    Thank you to those who have already submitted questions for our upcoming Microsoft 365 License Data Q&A.

    If there's any specific challenge you'd like the team to address, there is still time to submit your question ahead of the Q&A. Questions submitted before 5th June 2026 will be prioritised.

     

    👉Submit your question: [link]

    📅Q&A: Wednesday 10th June 2026

    🕒 From 3:30–4:30 PM BST | 10:30–11:30 AM EST

     

    Please note this is not a webinar, and there is no registration required - simply log into the Flexera Community and participate in the Q&A thread during the scheduled session window.

     

    👉 View full session details: [Link to blog page]

     

    If you’d like a calendar reminder, you can request one in the form.

    We look forward to your questions!

    Expand Post

  2. MercedesO (Flexera Software) asked a question.

    Not at AWS Re:Invent? Share your cloud discovery of the year, Hidden Cloudverse swag pack is up for grabs!

    Hi Everyone,

    As mentioned in my other post, our team is gearing up for AWS re:Invent, however we are fully aware some of you may not be able to attend this year so we'd like to hear from you. Here is my question:

     

    What is the one thing you have discovered in your cloud this year that made a real difference i.e a fix, insight or optimization you are genuinely proud of or have learned from?

     

    if there's enough interest in this topic, I'm happy to facilitate a virtual call so we can have a proper idea exchange.

    There's more: The most liked reply (or the most creative) will win a Hidden Cloudverse Swag Pack, featuring our legendary Drizzle, Flash and Nimbus plushies, limited-edition lollipops, and other cosmic goodies! I have included a teaser photo to let you know the stakes!

     

    -Please share your discovery by Thursday 27th November,

    -Keep it under 200 words

    -Share your own experience (nothing confidential or sensitive)

    -One entry per person

     

    Looking forward to reading what you've discovered this year!

    image of plushies 

    Expand Post

  3. BiaFerrari likes this.
  4. MercedesO (Flexera Software) asked a question.

    New Community Manager Introduction - Hello from Mercedes

    Hi Flexera Community,

    I'm Mercedes, your new Community Manager for Flexera and I am excited to be here!

     About me

    I started out in Law & Legal Tech and somehow along the way I discovered my passion for building brand communities. I am here to make the Community more useful i.e keep conversations flowing, share updates from our teams and help members connect in meaningful ways whether its swapping best practices or just learning from each other in our forums.

    But first…I'd love to hear more from you:

    👉 How are you using the Community today?

    👉 What's working well?

    👉 What could we do better?

    You can share your thoughts in the comments below or fill in this feedback form if you'd prefer (it will only take 5 mins!) Please share your feedback by COB 16th September 2025.

    Form link: https://forms.office.com/r/jYvBkdgGTQ

    Look forward to hearing from you!

    Mercedes

    Expand Post

    Paul_R, davidle, and 5 others like this.
End of Feed
End of Feed
8 Chatter Feed Items
Loading
Flexera One | Flexera Community